Note

• The heating element is double insulated, eliminating the need for an earth connection.
• The optimum temperature is 36°C, therefore a transformer or thermostat is not required.
  

1. Take a power feed from a light circuit or separate electrical circuit, exiting the wall where the mirror is mounted.
2. Peel back the self-adhesive cover from either the top or the corner of the demister, gently smoothing it to the back of the mirror as you peel it off. Ensure it is completely flat once all the backing has been removed.
3. Line up the power feed with the heater cold tail so the connection does not protrude from the wall.
4. The mirror can be screwed, glued or mounted in a frame.
5. The demister can be placed on either the back of the mirror or directly onto the wall.